View TND027MP_617049.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENN7691
TND027MP
ExPD(Excellent Power Device)
TND027MP
Features
* * * *
Lowside Power Switch Lamp-, Solenoid-, and Motor-Driving Applications
N-channel MOSFET built in. Overheat protection. (Self recovery type) Overcurrent protection. (Self recovery type current limiting function) Overvoltage protection.
Specifications
Absolute Maximum Ratings at Ta=25C
Parameter Drain-to-Source Voltage Output Current Input Voltage Allowable Power Dissipation Operating Supply Voltage Operating Temperature Junction Temperature Storage Temperature Symbol VDS IO(DC) VIN PD VDS(opr) Topr Tj Tstg Conditions Ratings 60 1.5 --0.3 to +10 1.0 40 --40 to +85 150 --55 to +150 Unit V A V W V C C C
Electrical Characteristics at Ta=25C
Parameter Drain-to-Source Clamp Voltage Output-OFF Current Input Threshold Voltage Protection Circuit Operating Input Voltage Drain-to-Source ON Resistance Input Current (Output On) Over-Heat Detecting Temperature Over-Current Detecting Current Over-Current Limit (Peak) Input Clamp Voltage Symbol VDS, clamp IDSS(1) IDSS(2) VIN(th) VIN(opr) RDS(on) IIN Tj(sd) Is ILMT VIN, clamp VIN=5V, IO=1A VIN=5V VIN=5V, IO=1A VIN=5V VIN=5V Conditions VIN=0, IO=1mA VIN=0, VDS=50V VIN=0, VDS=12V VDS=5V, IO=1mA Ratings min 60 10 5 1.0 4 0.3 120 3.0 3.0 10 150 6.0 6.0 1.5 2.0 10 0.4 0.6 190 9.0 9.0 typ max Unit V
A A
V V mA C A A V
IIN=1mA Notes : 1. Overcurrent protection circuit limits the output current to the range of overcurrent limit value. 2. During overheat protecting operation, output current is turned off.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
O2203 TS IM TA-100479 No.7691-1/5
TND027MP
Package Dimensions unit : mmm 2145
6.0 5.0 4.7
0.5 0.6
6.0 14.0
3.0
8.5
0.5
0.5
123
1 : GND 2 : OUT 3 : IN
1.45
1.45
SANYO : MP
Block Diagram
OUT(D) Overcurrent protective circuit IN Output current control ESD protective circuit Overheat protective circuit Overvoltage protective circuit
Gate shutdown circuit
GND(S)
0.5
RDS(on) -- Ta
IO=1A
1.0
RDS(on) -- VIN
IO=1A
0.4
Drain-to-Source ON Resistance, RDS(on) --
4V
0.3
Drain-to-Source ON Resistance, RDS(on) --
5V
0.8
0.6
6V
0.2
0.4
Ta=85C
0.1
0.2
25C --40C
0 --50
0 --25 0 25 50 75 100 IT05233 0 2 4 6 8 10 12 IT05234
Ambient Temperature, Ta -- C
Input Voltage, VIN -- V
No.7691-2/5
TND027MP
0.12
IIN -- Ta
VIN=5V
1.4
IIN -- VIN
Ta=25C
0.10
1.2
Input Current, IIN -- mA
Input Current, IIN -- mA
1.0
0.08
0.8
0.06
no (ab I IN
rm
al)
0.6
0.04
0.4
0.02
0.2
IIN(normal)
0 --50 0 --25 0 25 50 75 100 IT05235 9 0 2 4 6 8 10 IT05236
Ambient Temperature, Ta -- C
9
IS -- Ta
Overcurrent Detecting Current, IS -- A
Input Voltage, VIN -- V
IS -- VIN
Ta=25C Overcurrent Detecting Current, IS -- A
8 8
7
7
6V 5V
6
4V
6
5
5
4
4
3 --50
3 --25 0 25 50 75 100 IT05237 12 4 5 6 7 8 9 10 IT05238
Ambient Temperature, Ta -- C
9
ILMT -- Ta
6V
5V
Input Voltage, VIN -- V
ILMT -- VIN
Ta=25C Overcurrent Limit, ILMT -- A Overcurrent Limit, ILMT -- A
50 75 100 IT05239 13 8 10
7
8
4V
6
6
5
4
4
2
3 --50
0 --25 0 25 4 5 6 7 8 9 10 IT05240
Ambient Temperature, Ta -- C Drain-to-Source Clamp Voltage, VDS, Clamp -- V
70
VDS, clamp -- Ta
Input Clamp Voltage, VIN, Clamp -- V VIN=0 IO=1mA
Input Voltage, VIN -- V
VIN, clamp -- Ta
IIN=1mA
68
12
66
64
11
62
10
60
9
58 56 --50
--25
0
25
50
75
100 IT05241
8 --50
--25
0
25
50
75
100 IT05242
Ambient Temperature, Ta -- C
Ambient Temperature, Ta -- C
No.7691-3/5
TND027MP
2.0
VIN(th) -- Ta
VDS=5V IO=1mA
2.0 1.8 1.6
IO -- VIN
VDS=24V
Threshold Voltage, VIN(th) -- V
1.8
Output Current, IO -- A
1.2 1.0 0.8 0.6 0.4 0.2
1.2
1.0
0.8 --50
0 --25 0 25 50 75 100 IT05243 1.2 1 2 3 IT05244
Ambient Temperature, Ta -- C
Overheat Detecting Temperature, Tj(sd) -- C
160 158 156 154 152 150 148 146 144 142 140 4.0 4.5 5.0 5.5
Tj(sd) -- VIN
Allowable Power Dissipation, PD -- W
Input Voltage, VIN -- V
PD -- Ta
--40 C
1.4
Ta= 85 C
1.0
0.8
0.6
0.4
0.2
6.0 IT05245
0 --40
--20
0
20
40
60
25C
1.6
1.4
TND027MP
80
100 IT05246
Input Voltage, VIN -- V
Ambient Temperature, Ta -- C
Sample Application Circuit
AC24V
AC100V Lamp OUT TND027MP GND IN Microcontroller 5V
Another Sample Application Circuit (Solenoid drive)
AC24V
AC100V Solenoid OUT TND027MP GND IN Microcontroller 5V
No.7691-4/5
TND027MP
Operation Description * The output power MOSFET will be turned on when the input voltage exceeds the input threshold voltage (4 to 6V is recommended), and then the lamp will be turned on by the current flowing to the lamp. Conversely, the output power MOSFET will be turned off when the input voltage goes below the input threshold voltage, and the lamp will be turned off. * The inrush current that occurs during normal lamp operation is limited to a preset value by the built-in overcurrent protecting circuit, which makes the lamp life longer. * The internal overcurrent protection function limits the current of output power MOSFET when output current of at least the overcurrent detecting current value flows at load short. Besides, if the device temperature exceeds the allowable power dissipation, overheat protection function protects the power switch from being broken down by turning off the current of output power MOSFET when Tj comes to 150C (typical). * As an example of application circuit, DC voltage can also be controlled as a solenoid drive.
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2003. Specifications and information herein are subject to change without notice.
PS No.7691-5/5

▲Up To Search▲

Price & Availability of TND027MP

	To Download TND027MP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .